Dirty Dingo Mis-Fit adjustable engine mounts are designed to fit all big block and small block Chevrolet car and truck engines from 1958-1999. These Patented Design motor mounts give up to 1 1/2” of adjustment forward or rearward for a total of 3" of adjustment. You can use your factory rubber engine mount, any aftermarket urethane mounts, solid mounts, clam shells, or any 3 bolt mount that bolts to the engine. Simply bolt the bottom plate to your engine, then bolt your engine mount to the top plate and bolt them together. This mount system will raise your engine approximately 7/16". Precision CNC water-jet cut from .250 plate steel. Slotted for clearing the backside of aftermarket engine mounts and clam shells. Does not clear mechanical fuel pumps, or center dump exhaust manifolds.

Sold in pairs, Grade-8 hardware included. Plain steel, black texture powder coat is available from drop down box.

THESE ARE NOT LS SWAP MOUNTS- ONLY DESIGNED TO BE USED ON 99 AND OLDER SMALL AND BIG BLOCKS.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.