Oversized Item: Additional shipping charges will apply.

This is a genuine OE Sanden SD7H15 4711 508 A/C compressor, made in the USA. It has a satin finish and an 8-groove serpentine clutch. This compressor has a 154cc, or 9.36 CID, output and works well with many Hot Rod and Street Rod applications.

The Sanden 508 is built with 7 internal pistons and 6 bolts on the compressor head. This is the larger SD7 series compressor, not the smaller SD5 series with 5 pistons and 5 head bolts. The smaller SD5 compressors may create a loud harmonic noise when used on some LS and LT engine applications.

This compressor is compatible with both R-12 and R-134a refrigerant.

Features

• Genuine Sanden SD7H15 4711 compressor
• Made in the USA
• Satin finish
• 8-groove serpentine clutch
• 154cc / 9.36 CID output
• 7-piston SD7 design
• Compatible with R-12 and R-134a refrigerant
• Great for Hot Rod and Street Rod applications
• Clean, show-quality appearance

Installation

Installation should be completed by a qualified A/C technician.

The compressor contains assembly oil only. Before installation, drain the compressor and add the correct type and amount of oil for your A/C system.

The Sanden 508 Model 4711 requires 4.5 fl. oz. of SP-15 oil.

Always check the correct oil type and capacity for your application before installation.

Sanden SD serive Guide

Warranty

This compressor includes a 1-year manufacturer warranty.

If a warranty claim is needed, the compressor must be returned to the manufacturer for testing. This process may take several weeks. The manufacturer will inspect the compressor to make sure it was installed and oiled correctly. The customer is responsible for all shipping costs.

When an A/C compressor fails, metal or other debris can spread through the A/C system. Before installing a replacement compressor, the system must be cleaned properly.

For proper installation:

• Flush the complete A/C system.
• Replace the drier or accumulator.
• Replace the orifice tube or expansion valve.
• Replace any other damaged or contaminated parts.
• Add the correct type and amount of compressor oil.
• Install a condenser when required for the application.

Failure to properly clean and service the A/C system can damage the new compressor and may void the warranty.

Proof of proper installation, including replacement of the drier and metering device, may be required for warranty coverage.

For reference:

• Sanden 508 Model 4711: 4.5 fl. oz. of SP-15 oil
• Mini Sanden 7D7B10 Model 7176: 3.4 fl. oz. of SP-10 oil

Always follow all local, state, and federal regulations when servicing automotive A/C systems.

Hose fittings for the Sanden 508 compressor click HERE

Shipping charges for large and/or heavy oversized items and any item over 20 lbs will have an appropriate shipping charge per item.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.