Shopping Cart:  0 items
Quick Search


AC-SANDEN-R4-KIT - R4 to Sanden 508 Factory Bracket Kit

All threaded holes in the block and cylinder head should be cleaned and tapped with a thread chaser. All bolts being installed should be lubed with a light oil or anti-seize on the bolt threads before assembly. Torque all 10mm bolts to 28 ft. lbs. This will require a 1" longer belt.

 

 

 

 

 

Our model 4711 Sanden will run the belt straight down the middle of the 8 rib pulley while a model 4665 Sanden compressor will have the belt on the rear of the 7 rib compressor.

 

Shown is the model 4665 Sanden

 

 

 

 

 

 

 

 

<<  < Back to List >  >>
GM Gen 3 Gen 4 LS Conversion LS Swap Mounts and Accessories