LS Low-Mount A/C Kit with Sanden Mini Compressor and Billet Adapter

This item is oversized. Shipping charges apply.

This Dirty Dingo kit mounts a Sanden SD7B10 7176 mini A/C compressor low on the passenger side of 1997–2015 Gen 3 and Gen 4 LS engines. It keeps the compressor close to the engine block and runs on the inner 4-rib belt.

The bracket is laser cut and CNC bent from ¼-inch-thick cold-rolled steel, then finished with a black textured powder coat. The kit measures 10? inches from the center of the crankshaft to the outermost point.

Kit Includes:

• Low-mount A/C bracket

• Correct belt tensioner

• Precision CNC-machined 6061-T6 billet aluminum spacers

• Grade 8 zinc-coated bolts

• New Sanden SD7B10 7176 mini compressor with a 6-groove serpentine clutch

• CNC-machined 6061-T6 billet aluminum fitting adapter

Compressor Details:

• Designed for R-134a refrigerant

• Supplied with PAG oil; oil type and amount must be checked before installation

• Displacement: 100 cc / 6.10 cubic inches

The billet adapter converts the compressor’s flange ports to Tube-O-style connections:

• Discharge: Male #8, ¾"-16

• Suction: Male #10, ?"-14

Belt not included. Check the installation instructions for the correct belt size for your setup.

View Installation Instructions

Compressor Warranty and Installation Requirements

Compressors include a one-year manufacturer warranty. Warranty returns must be sent to the manufacturer for testing, which may take several weeks. The manufacturer will check whether the compressor was installed and oiled correctly. The customer is responsible for all shipping costs.

A failed compressor can spread debris through the A/C system. Before installing a replacement compressor:

• Perform a full system flush.

• Replace the orifice tube or expansion valve and the drier or accumulator.

• Replace any other parts damaged or contaminated by the failure.

• Replace the condenser when required for the compressor application.

Warranty coverage requires correct installation and proof of installation, including replacement of the drier and metering device.

The customer must check the compressor’s required oil type and amount. We strongly recommend draining the supplied oil and adding the correct PAG oil type and amount for the application.

Oil Requirements:

• Sanden 508 model 4711: 4.5 fl. oz. of SP-15

• Sanden SD7B10 model 7176 mini compressor: 3.4 fl. oz. of SP-10

Follow all local, state, and federal rules when servicing vehicle A/C systems.