|
Dirty Dingo Adjustable Gen V LT 4WD Truck Mounts
Dirty Dingo adjustable LT conversion mounts are designed for installing a 2014 and newer Gen V LT engineinto 1973–1987 4WD Chevrolet and GMC trucks and Suburbans.
These mounts are CNC laser cut from 1/4-inch thick 1050 high-carbon cold-rolled steelfor strength and long-lasting performance. The slotted design allows you to adjust the engine position for better fitment in the engine bay.
The engine can be moved up to 2-1/2 inches forwardor up to 1/2 inch rearwardfrom the original bellhousing position. Once the mounts are properly tightened, they securely hold the engine in place, even in high-horsepower applications.
Each mount is formed on a precision CNC press brake using a large-radius die to help reduce stress at the bends. These mounts are designed to work with the factory rubber clamshell-style mounts on the original frame.
They can be used with many manual and automatic transmissions, including:
-
Powerglide, TH350, TH400, 700R4, 4L60E, 4L65E, 4L70E, 4L80E, 6L80E, 6L90E, 8L80E, 8L90E, 10L80E, 10L90E
-
Other manual and automatic transmission combinations
Grade 8 zinc-coated hardware and new cross bolts are included.
Please Note:
-
Raw steel is not painted
-
Black texture powder coat is available
-
Sold as a left and right pair
-
“D” marks the driver side
-
“P” marks the passenger side
-
Arrows point toward the front of the vehicle
-
Will not clear a low-mount A/C compressor
-
Will clear a low-mount vacuum pump, but engine adjustment will be limited
-
Removing the vacuum pump is recommended for maximum adjustment
-
LT truck engines require a Holley 302-20 oil pan
-
Some applications may still require notching the factory engine crossmember for proper clearance
|
