LT-63-72 C10 LS 2WD Combo Glider Mount-Trans Kit

LT 63-72 C10 2WD Combo Glider Mount-Trans Kit

LT 63-72 C10 2WD Combo Glider Mount-Trans Kit

Click to enlarge

Price	$329.99
Model	LT-C10-2WD-GLIDER-COMBO-K
Manufacturer	Dirty Dingo
Quantity:
	Add to Wish List

Available Options:
Transmission Mounts:


Urethane Mounts/Inserts:


Powder Coat:

Description

This item is an oversized item and shipping charges will apply.

Dirty Dingo 2WD 1963-72 combo kit includes our DD-GLIDER Adjustable LT conversion mounts, new factory replacement rubber mounts and our DD-C10-TRANS adjustable transmission cross member kit. Optional urethane engine mounts and older style rubber or urethane transmission mount. Powder coat upgrade is also discounted with this kit.

DD-GLIDER Conversion Mounts-

Adjustable LT Gen V conversion swap mounts are designed to place the Gen V LT engine in the original bell housing position on 1958-72 GM Cars and trucks. These mounts slide forward up to 2 inches and lock the engine down anywhere in between. Bottom plates and spacer plates are CNC machined from 1/2" thick 6061-T6 aircraft billet aluminum on a precision vertical CNC milling center. Top plates are CNC laser cut from .250 thick Grade 70 cold roll plate steel. Designed to be used with original Chevrolet/GM 3 bolt big and small block Chevrolet engine mounts.

* Will not clear low mount ac or low mount alternators.

* Will not clear driver's side vacuum pump on truck engines.

DD-C10-TRANS Transmission Cross Member-

Dirty Dingo adjustable transmission cross member will bolt to the frame using existing transmission mounting holes. This adjustable cross member will allow you to run a powerglide, TH350, TH400, 700R4, 4L60, 4L65, 4L70, 4L75, 4L80, 6L80, and 6L90 and adjust the cross member without drilling any new holes into your frame. This is designed for lifted or lowered trucks and will retain the factory transmission angle for proper driveshaft alignment. CNC bent 1 3/4" diameter tubing with 1/4" plates that will clear long tube headers and exhaust up to 4" in diameter. Cross member is above frame rails and will clear when laying the frame on the pavement. Includes grade-8 bolts, washers, and teflon locking nuts for installation. Welded and cooled in a custom fixture for precision fit.

* Optional urethane engine mounts

* Optional rubber transmission mount.

* Can be used with Anchor transmission mount 2268/2811, or Energy suspension 3.1108, newer 4L80 transmissions use a GM 23134733 mount.

* For 6L80E and 6L90E use Anchor transmission mount 2392 or Energy Suspension 3.1158.

If your transmission uses the wide Anchor 2638 mount you can use our adapter plate to convert to older style Anchor 2268/2811 mount.

DD-SLIDER-TRUCK Rubber Mounts-

Factory rubber engine mounts for 1963-72 Chevrolet and GMC 2WD trucks that are pre-cut to fit properly when installing Dirty Dingo Sliders. Requires 7/16-14 through bolt required, not included.

* Plain raw steel, black texture powder coat is available.

* Can not combine additional discounts, Military etc,

Images

Mfg Info

Manufacturer Info
• Other products

Extra Info

Comments
There are currently no product reviews
Write a review on this product!

Extra Info

Notify me of updates to LT 63-72 C10 2WD Combo Glider Mount-Trans Kit
Tell someone you know about this product.

Shipping

This is a heavy item and its weight is 40.00 lb(s)

Shipping charges for large and/or heavy oversized items and any item over 20 lbs will have an appropriate shipping charge per item.

Customers who bought this product also purchased

GM Gen V 2014+ Truck Harmonic Balancer

LT Truck Billet Alternator Power Steering Type 2 Pump Street Rod

LT Sanden 508 A/C Bracket Assembly

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.